The download went through, but DWG TrueView will not install on a machine with the Mac operating system, without it DWG files are unable to be opened when AutoCAD for mac is not installed. Causes: DWG TrueView is built to run on the Windows operating system, and will not install on the Mac OS. Mac OS X virtual machines can have only the Mac OS X Server Leopard or Mac OS X Server Snow Leopard operating system installed. See KB 112323. I can't install a Mac OS X Lion virtual machine.
I installed Windows 8.1 Enterprise via Bootcamp on my MBP (Nov 2013 model), now I can only boot into Windows, no way to boot into OSX.
When I hold the ALT button at boot, the menu shows only Windows and there is no option to boot OSX.
When I select 'OSX' from the control panel Bootcamp utility, and reboot, the system goes into Windows regardless. Windows works just fine (I'm using it now) but my main setup and a lot of work in progress is on OSX so I really need to recover it. Anyone knows how to recover the OSX partition, so that I can boot into OSX ? I'm happy to drop Windows if that's the case, but I cannot proceed with a fresh install wiping OSX.
The laptop is a MacBook Pro November 2013 model, with one original SSD drive (without DVD drive, however I have an external one) and I don't have a OSX installation disk, so I could not try recovery utilities etc.
I have tried a couple of Windows utilities, trying to change the Active partition, but for some reason that option is always grayed out, even DiskPart doesn't allow to set it.
I checked Disk Management and the OSX partition is still present (partition 1):
and this is the output of MS DiskPart utility:
This How do I make my Boot Camp partition bootable again? seems to be very close to my problem, but rEFIt is distributed in CDR format, I tried to convert that to ISO and burn to a USB with no luck, the system won't see the USB.
Anyone knows of other ways to fix Bootcamp loader to show OSX partition ?
3 Answers
I had the same error after installing windows in bootcamp. I rebooted and the OS X partition was not an option, only windows. I checked in disk management in Windows and the partition still existed. I tried booting in recovery mode (command+r), but received an error message. -4403F
Apple support had me boot in internet recovery mode (command+option+r), which did successfully load.
I then went to disk utility, and the Macintosh HD disk was grayed out. I clicked on the mount/unmount button and had to unlock my computer. It turns out I had used file vault, which encrypted my hard drive.
Somehow that kept OS X from appearing after I used bootcamp. After unlocking it, I was able to verify and repair the disk.
I booted to windows and the bootcamp utility appeared. I clicked 'Restart in OS X.' OS X booted without a problem after that.
Yours is quite a new model of MacBook Pro : Your firmware would be UEFI compliant. On such machines Windows can use GPT disk partitioning and boot from your firmware boot menu without any need of BootCamp. What BootCamp does is to apply an ugly hack to make it look like being an MBR partitioned disk to Windows, which can then boot via BIOS.
What seems to have happened is that your Windows seems to have switched modes at some time, and has established itself as a UEFI-booting OS on GPT. BootCamp as a bootloader is now no longer required.
Your firmware boot menu would have originally contained only an entry for Mac, and for some unknown reason Windows Setup seems to have wiped it out.
In short, what you need to do now is to add a new boot entry in your firmware menu pointing to your OS X bootloader, which I have gathered from the web to be /System/Library/CoreServices/boot.efi on your HFS+ volume. However, I understand that it is enough just to specify your HFS+ volume for it to boot. I am however ignorant of the UEFI boot process and firmware on Mac, someone else should be able to help you here to add the entry.
Start over with Bootcamp...
This is from wiping the HDD instead of partitioning within BootCamp; which leaves no way to communicate with Apple's server. OS X install is electronic. Windows includes the option to turn off 'secure boot'; ARM and Apple do not. OS X requires BootCamp and a small Apple partition, similar to Windows Boot Loader. I have BootCamp and the Apple partition, but only Windows 8 only on my Mac. There is no native support to re-install OS X from this configuration, either. I am guessing I can manually create a partition that OSX will recognize....some other day. EUFI is not standardized, yet.
Not the answer you're looking for? Browse other questions tagged macospartitioningboot-camp or ask your own question.
Today's Best Tech Deals
Picked by Macworld's Editors
Top Deals On Great Products
Picked by Techconnect's Editors
Mac Unable To Detect Android Phone
Parallels Desktop 5 for Mac
Virtualization
Show MoreWhen I last reviewed virtualization software in 2008, I found Parallels Desktop 4 for Mac effective, but saddled with a bit of bugginess and lacking some DirectX support. Parallels 5 Desktop for Mac (I tested build 9308) solves both problems, while adding features and improving performance.
Among the most notable of those new features: a much-faster virtualization engine; automatic compression of Windows’ hard disks; a new virtual machine manager; and a new lockdown mode, which requires a password to exit full screen mode, make changes to the virtual machine state, or manage snapshots (perfect for system administrators who don’t want end-users mucking up their machines).
Installation, setup
I tested Parallels Desktop 5 by using it to install Windows XP Pro, Windows 7 Ultimate (both 32-bit and 64-bit versions), and Ubuntu Linux 9.10 on my Mac Pro (2.66GHz quad core with 8GB of RAM, running OS X 10.6.2).
Installing both Windows and Linux is easy in Parallels; it has assistants that automate the process for both. It also installs Parallels Tools, which handles the task of mouse integration between the guest OS and Mac OS, as well as allowing easy guest desktop resizing by resizing the guest OS window.
Parallels For Mac Unable To Detect Operating System Windows 10
There are a couple aspects of installing guest OSes that could be improved. First, every time you create a new virtual machine, Parallels creates an alias to that virtual machine on your OS X Desktop. There’s no way to avoid this, so if you find the aliases useless (as I do), you have to manually remove them each time you create a virtual machine.
More troubling is that, when creating a new Windows virtual machine, the default settings are for full integration of the Mac OS and the Windows guest—the default even sets the Windows’ user folder to the Mac’s Users folder. As someone who has personally experienced Windows malware infections, total integration is not something I recommend for most virtual machine users, and yet it’s the default behavior in Parallels.
Parallels also defaults to booting Windows virtual machines in the fully-integrated Coherence mode, where the Windows desktop vanishes, and Windows’ windows are intermingled with those of OS X. For someone expecting a standard Windows interface after installation, this can be disconcerting.
The basics
Like Fusion 3, Parallels 5 now supports Windows Aero in Windows 7, and also includes OpenGL 2.1 acceleration in both XP Pro and Windows 7 (Fusion only supports OpenGL 2.1 in Windows XP Pro). In addition, OpenGL acceleration is included in Linux guests, enabling full visual effects (such as windows that deform when dragged) in Linux systems such as Ubuntu 9.10. More usefully, you’ll also be able to run Linux programs that require OpenGL acceleration. Parallels is alone in its support for OpenGL 2.1 in Linux and Windows 7. I found the Aero effects worked very smoothly in Windows 7 on my Mac Pro.
As with its competitors, Parallels handles typical office productivity applications with ease, in both Windows and Linux. Microsoft Office (Windows) and OpenOffice (Linux) both ran well, and had no troubles with the mixture of spreadsheets and documents I tried opening and editing in both. Web browsers and e-mail clients also performed well; if this is the extent of your virtual machine needs, Parallels 5 will easily meet your requirements.
Parallels 5 was also the fastest of the three programs I tested in the vast majority of the benchmark tests I ran—including the all-important real-world tests. Whether it was copying files to or from the Mac, or expanding zip archives, Parallels easily outpaced its competition. As one example, copying 2.5GB worth of files from the Mac to a Windows 7 machine via a shared folder took just over a minute in Parallels. That same task took nearly two minutes in VirtualBox, and about a minute and a half in Fusion.
Suspending, waking, booting, and shutting down were all quickest in Parallels, too. There’s a small caveat there, at least with suspending. When I tried sleeping the machine while a 3D game was running, it worked, but the game didn’t work after waking from sleep. In Fusion, the same experiment worked just fine—so one tradeoff of the faster sleep time in Parallels is, at least in my testing, an inability to sleep and then resume a 3D game. As a user, you’ll have to decide whether the faster suspend times in general are worth this tradeoff when trying to suspend an in-progress 3D game. (This may not be an issue with all games, but it was in the two I tested with.)
Like Fusion 3, Parallels 5 offers improved multi-monitor support, treating two displays as separate monitors in Windows, and as one large gargantuan display in Linux. Adding a third screen to the mix worked perfectly in Windows. In Linux, however, the third screen was seen by the system (the horizontal resolution reflected its existence), but it was all white, and I couldn’t see anything that I dragged onto that screen.
To make working in full-screen mode easier, Parallels 5 lets you specify behaviors for mousing into the four screen corners—you can switch to one of the other available view modes, or show the Parallels menu bar. Once you’ve set a behavior for a corner, moving the mouse into that corner will “peel down” and reveal a bit of your OS X desktop. Unfortunately, there’s no visual indication of what happens if you then click the mouse, so you’ll need to remember which corner you’ve assigned to which task.
New looks for Windows
Parallels 5 features a new view mode, Crystal, along with a new Mac-like theme for use within Windows. Crystal view mode takes Coherence mode one step further. You won’t find the Start menu or task bar anywhere in Crystal mode—in fact, you won’t even see the Parallels Desktop icon in your Dock. Instead, a menu bar icon lets you change view modes, see the Windows Start menu, or work with attached devices. You’ll also find your task bar icons (optionally) in the menu bar, and Windows Applications folder in your OS X Dock. Any open windows will be integrated with your OS X windows, as in Coherence mode.
Crystal mode works reasonably well, though you can’t Command-Tilde to toggle between multiple windows of the same Windows’ application, nor can you use Snow Leopard’s Dock Exposé mode with Windows’ windows. Both of these features work as expected in Fusion. I also found that dragging windows around in Crystal mode, when using an Aero theme in Windows 7, was quite laggy on my Mac Pro. I had much better results after I disabled Aero in Crystal mode (you can control this in the virtual machine’s Settings).
I experienced some strangeness when I had Windows Media Player window open in Crystal mode, and then used Exposé’s All Windows mode. In addition to the opened windows, I also saw three “ghost” windows for Windows Media Player, and some visual distortion was visible in the Excel window.
Selecting any one of these “ghost” windows would simply switch to Windows Media Player, so it wasn’t a critical issue, but it definitely looks odd when using Exposé.
The second new look for Windows in Parallels is MacLook, which is actually an OS X-like theme for Windows (XP, Vista, and 7). You apply MacLook via the View menu, and Parallels then works for a minute or two to install the theme. The objective is to make Windows less visually shocking for someone switching between the Mac OS and the Windows OS.
While that’s the idea, I think MacLook fails fairly badly in achieving the goal.
Because not every element in Windows is themable, what MacLook winds up giving you is a series of different-looking windows within Windows—some look something like OS X windows, others look like native Windows windows, and still others look like some strange Frankenstinian mixture of the two.
Some windows are square, others are rounded; none seem to have shadows and some are missing edge borders; some have the red/yellow/green buttons from OS X at the top right, some at the top left, and others lack them completely.
I can’t imagine that anyone who likes and uses the OS X interface regularly will find MacLook to be an improvement over the stock Windows theme—at least there’s some consistency there, and the windows all mostly look the same.
When I unchecked the MacLook entry in the View menu, which should disable MacLook, I had some issues in Windows 7—the uninstall process didn’t quite complete, leaving an even odder mix of window appearances. I was able to resolve that issue by using the Personalization section of Windows preferences to pick a stock Aero theme.
Graphics and gaming
Parallels Desktop 5 has a very good engine for gaming. I had excellent results with older games, and very good results even with more-recent releases. The demo version of Call of Duty 4, which I was unable to run with decent frame rates in Fusion, ran acceptably (albeit at minimum levels of detail) after some tweaking in Parallels.
With OpenGL acceleration in all main versions of Windows (and Linux), Parallels can handle programs that the other two virtualization apps just aren’t capable of running at present. In addition, Parallels’ OpenGl implementation, as measured in the Cinebench benchmarking test, was the fastest of the three programs in any version of Windows. (All game tests were done in Windows 7, to stress the virtual machine as much as possible.)
Parallels also does an admirable job with DirectX games in Windows. For example, I was able to play the MotoGP 08 demo with good frame rates in a 1024x768 window, though the audio did stutter a bit.
More impressively, Microsoft Flight Simulator X, a program that just a few years ago required a high-end PC to run at all, ran admirably well in Parallels. The audio was mostly stutter free, and the frame rate in a 1024x768-sized window was more than acceptable in the missions I tested.
That’s not to say I was getting anywhere near the frame rate I’d get if I were to reboot my Mac and run Flight Sim X natively via Boot Camp. However, for someone who doesn’t need every bit of speed in their games, the loss in frame rate may be worth the convenience of not having to reboot.
Most older games run very well, so much so that there’s no reason to reboot via Boot Camp to play “vintage” titles. Note that some older games may need to run on older versions of Windows; Windows 7 won’t run all your older games.
Given what was possible in gaming and graphics with the first version of Parallels a few years back—basically nothing—it’s amazing how much progress has been made in a very short period of time.
Multimedia performance
To test Parallels’ media handling, I watched a 1080p Windows HD media file in full screen mode in each version of Windows. I was watching for visual glitches, listening for any disruption in audio playback, and tracking CPU usage to see how each virtual machine handled the task.
In short, all three of the Windows OSes handled the HD video file without any major issues. The one-CPU Windows 7 box had a bit more variation in frame rate than did the two-CPU machines, but it was very hard to spot unless watching the video back-to-back (which I did, many times).
Other features and observations
This version of Parallels cleans up the installation on a Mac—in prior versions, Parallels’ virtual network drivers were visible in the Network System Preferences panel. In Parallels Desktop 5, those drivers no longer appear, preventing possible user confusion.
Also new in Parallels 5 is support for Apple’ multi-touch gestures (swipe, rotate, pinch) using an Apple Magic Mouse or the trackpad in a multi-touch capable Apple laptop (you can also use an Apple Remote for some basic control, if you wish). Parallels Tools takes care of the communication between the mouse/track pad and the guest OS, so there are no special requirements on the Windows side—gestures simply work in Windows XP and newer.
I tested this using XP Pro on my MacBook Pro, and it worked as described. I was able to use pinch to zoom in/out on images in Microsoft’s Picture Viewer, and to change the size of the text on an Internet Explorer page. Rotation gestures also worked as expected on the images. If you’re a laptop or Magic Mouse user, this is a nice addition to your Windows virtual machines.
As you can probably tell from the features described in this review, Parallels is a feature-rich program. Sometimes, though, feature overload can lead to a complex user interface, and there are spots in Parallels where that’s the case.
Take the virtual machine Configuration panel, for instance, which contains 15 separate sections. Or the Preferences panel, which includes 11 separate tabs, some of which contain a large number of items that can be configured. While these sections and tabs are relatively well laid out, the sheer number of choices can cause confusion.
For example, you might think that defining how Mac and Windows 7 keyboard shortcuts coexist would be found in the virtual machine Configuration panel…but that’s not the case. Instead, you define the shortcuts in the Preferences panel, where you can set up definitions for Windows, Linux, OS X, and generic guests.
Parallels Desktop 5 for Mac
Pros
- Multi-touch support
- Very fast in all facets of use
- Very good DirectX and OpenGL support
- Cleaner installation than prior releases
- Feature rich
Cons
- Sleep mode may prevent resuming 3D games
- MacLook theme for Windows isn't all that good
- Features add complexity
- Defaults to fully-integrated OS X/Windows mode
Virtualization
Want to run Windows (or Linux) on your Mac? Then you need virtualization software. But which of the...
Which of the three major Mac virtualization apps (Parallels Desktop, VMware Fusion, or Sun's...
We put the latest version of Parallels Desktop 5, VMware Fusion 3, and Sun's VirtualBox through a...
Rob Griffiths provides a peek behind the curtain at the virtualization roundup, explaining what...
Parallels 5 is a feature-rich and speedy virtualization solution that does an excellent job with...
VMware's Fusion 3.0.1 adds many new features, including a full-screen toolbar, improved DirectX...
The latest version of VirtualBox supports multiple CPU cores and accelerated DirectX graphics in...